Driveway Permit Application
Amended Policy Statement No. 2024-01
Before you begin, please see the:
Driveway Permit Information Packet
Construction Permitting within Borough Rights-of-Way
- Pursuant to KPB 14.40.040(A)(1) a driveway permit must be obtained for construction at intersections between private drives and borough rights-of-way.
- Permittee shall construct an adequate transition from the shoulder of the road to the level of the driveway. Length of intersection approaches shall be as required to
create a smooth intersection. Where practical, vertical grade shall not exceed 4% within 50 feet of the driveway intersection with the road. - Material for driveway intersections shall meet the requirements for subbase grading RSA Type 1 specified in KPB 14.06.
- Installation of a driveway culvert shall normally be required to provide proper drainage for the road. Driveway culverts shall be a minimum of 15 inches in diameter and 30 feet in length or as determined by the RSA director. All culverts, coupling bands and special sections shall be corrugated steel pipe, minimum 16 gauge. Plastic culverts are acceptable if they meet ADOT & PF Standard Specifications Section 706-2.07 corrugated polyethylene pipe, AASHTO M 294, Type S.
- Driveway intersections shall be constructed as nearly at right angles with roadway as possible.
- Exceptions due to individual circumstances may be granted by the RSA Director.